Real stone paint is widely used because of its energy saving, environmental protection, realistic stone imitation effect and cheaper cost compared with stone. However, in the specific construction, there are often two faces of the same wall embarrassing situation, whether to solve the color difference problem has become a real stone paint can be sustainable development of a difficult problem.
The use of poor quality tools in painting is easy to cause chromatic aberration, poor painting tools will cause uneven brushing, different thickness, and eventually produce chromatic aberration.
Solutions
Use good quality coating tools to avoid uneven brush and thickness. Different kinds of products are strictly in accordance with the product's exclusive construction tools, not different products common construction tools.
Because stone-like coatings generally use natural colored sand, affected by the objective factors of natural raw materials, stone-like coatings in the production process, between different batches easy to appear slight color difference, after construction, will increase the color difference on the wall surface visually.
Solutions 2.
The same building, as far as possible one time enough products required; the need for different time batches of supply, and the manufacturer to prepare raw materials in consultation with color sand, reduce the raw material link color difference.
Of course, the same batch of products will be painted wall because there is no uniform stirring, dilution is not consistent, different construction methods and color problems.
Solutions 3.
1. It is suggested that the same batch of construction should be constructed on the same wall with the same batch. The whole wall should be built from top to bottom, so as to avoid the old and new color caused by intermittent construction. Planar and wool effects produce sensory differences. Pay attention to color differences in certain colors under backlight and positive light, direct sunlight and refraction.
2. Repair chromatic aberration: After one wall is constructed, keep several barrels of the same batch of products as far as possible so that the defective wall can be repaired in the sweeping end stage of the project, and avoid the chromatic aberration caused by the sweeping end repair.
3. Choose a professional team with rich experience in construction.